Evolution Cycles
1087 Hickory Hill Pkwy.
Hubertus, WI 53033
414-573-7031
DynaBeads wheel balancing system for all motorcycles
Evolution Cycle now carries DynaBeads for dynamic balancing of any motorcycle wheel without ugly wheel weights,
and automatic compensation,
on the fly, for dirt/mud/snow that might get stuck to your wheels.
Free installation available for in-shop or rally purchases. Call for an appointment.
For DynaBeads questions please call 414-699-5726, Thanks!
The perfect solution for Dual-Sport or off-road riders who often have dirt/mud/etc. stuck to the wheels!
The DynaBeads continuously redistribute themselves inside of the tire to maintain perfect balance automatically.
See them at work in this exclusive video demonstration!
Click the image above to watch the Video Demo
Great for custom bikes!
Using DynaBeads enhances the appearance of any wheel by eliminating ugly glued or clamped on balancing weights.
Available in four different pre-packaged motorcycle kits depending on the size of the wheels/tires to be balanced.
Order based on the size of your tires. For bikes regularly used in dual-sport/off-road conditions where dirt/mud caking in the wheels is a problem, please add one ounce of beads to the recommendations in the table.
Motorcycle applications are easy for all road bikes. |
|
| BMW TeleLever Front Suspension with 80 - 120 mm tire width | 2 oz |
| 80 - 120 mm tire width | 1 oz |
| 130 - 240 mm tire width | 2 oz |
| 260 - 360mm tire width | 3 oz |
| Specialty Applications: | |
| Dual-Sport/Off-Road usage | add 1oz to above |
| VTX owners with car tire installed on rear | 3 oz |
| 10" diameter wheels (scooters) | 1 oz |
| 12" & Up diameter wheels (scooters) | 2 oz |
| Trike & Sidecar automotive tires with up to 225 section width | 3 oz |
| Goldwing owners need 2 oz in front tires, 2 oz in rear | |
|
Note: Filtered valve cores may be needed for sharply angled or bent valve stems, due to the possibility of beads staying in the stem when the wheel stops. (The straight section of valve stem needs to be at least 1-1/4" long for filtered valve cores to fit / work properly.) |
|
Select your kit below, then go to the ordering page to make your purchase:
 |
||||
|
||||
| DBS-BP1 | Bike Pack #1 - (2) 1 oz Premeasured Tubes | $8.25 | ||
| DBS-BP2 | Bike Pack #2 - (1) 1 oz + (1) 2 oz Premeasured Tube | $10.49 | ||
| DBS-BP3 | Bike Pack #3 - (2) 2 oz Premeasured Tubes | $12.75 | ||
| DBS-BP4 | Bike Pack #4 - (1) 2 oz + (1) 3 oz Premeasured Tube | $15.99 | ||
| DBS-FVC | Filtered Valve Core - for angled & bent valve stems | $1.10 | ||
 |
||||
;)
See some of the frequently asked questions about DynaBeads by clicking here: FAQ
Call for an appointment for an in-shop purchase with free installation available, or:
Please visit the Ordering Information page if you would like to purchase DynaBeads for your bike.
For DynaBeads questions please call 414-699-5726, Thanks!
Dyna Beads
Champion Sidecars
